Showing posts with label baby. Show all posts
Showing posts with label baby. Show all posts

Tuesday, July 3, 2012

the summer of quilts

This little beauty of a quilt will be number three for the summer. I've never made this many quilts this close together. In fact, I've never come close to doing this many quilts in such a short time. That means only one thing, I am getting to be a 'faster' quilter. Yay! (Previously I was ridiculously slow when it came to quilting.) I am kinda loving quilting now. LOVING. Now I can finally begin the two quilts I have planned for my family room.


This quilt was for yet another one of my sister-laws who is expecting a little girl this month. I also threw her a shower at my house on Saturday and it was such a good time. Somehow I didn't take one picture of the whole thing. Not sure how that happened. Anyways. Before I rolled this cute little quilt up to give her, I snaped a few pictures of it.


Originally, I was going to make yet another Little Man Quilt from Simplify by Camille Roskelley/ Thimble Blossoms. However, at the last minute, I decided to try something new. I decided on this awesome quilt from Tasha at A Little Sweetness that I pinned awhile back. She doesn't give the fabric measurements in the blog post, but essentially the quilt is just various widths of fabric strips. I just guesstimated widths by looking at her pictures. I wrote down my measurements so I can make this quilt again and I know I will. It makes an awesome gift and comes together in a flash.
 

I lucked out because Little Man calls for fat quarters and I purchased most of these fabrics at Joanns where they don't cut fat quarters from the bolt. So of course I had to buy 1/2 yard cuts. That worked out perfectly because I needed the full width of the fabric to make this quilt. I had some gray Chevron from Riley Blake that I was dying to use in a project and it worked perfectly with the other prints in this quilt. I also pulled a couple of prints from my stash. I love it when I'm able to 'shop' from my stash.



So enough blah, blah, blah. One more quilt done and done. Yay!

Happy Tuesday! Oh and happy 4th of July tomorrow to all my US readers. Not sure how the year is already half over.

LeAnne :)

Wednesday, July 7, 2010

Tutorial: Sweet Summer Dress

You can make this for any sized little girl. (I've made it as small as 4 months.) I also have a white under-dress that I made to go with these. (I purchased the pattern from here, it is called the Lulu {Peasant Style Top Or Dress}.)


You also can make the straps: spaghetti, narrow, thick, or from ric rac or ribbon!


 Or you could also make it a tunic or top!




 Either way...when you are done...you are going to have one sweet little dress.



All you need are a few measurements to get started. (My measurements are in blue an for a tall 9 - 12 month old.)

Measurements
1. Length. Since this dress has straps, just measure from under her arm to desired length. (For a tunic or top, it will just be shorter.)
14"
Then add 2". This allows for the hem and folding under the raw edge at the top.)
Final Length Measurement: 16"

2. Chest Measurement #1. Measure around her chest.
18.5"
Then add 1" for seam allowances, which will be 1/2".
Final Chest Measurement #1 : 19.5"

You can also measure really quick on your girl how far you want the shirring to come down. This will be helpful in step 13.


Fabric
How much fabric? Purchase yardage that goes with your length measurement. ex: For a dress that measures 18" long (including hems) get at least 1/2 yard. You can use the Yardage Card as a guide to help you. I like to get a 1/8 - 1/4 extra to account for shrinking that can occur during prewashing/drying.  (I ALWAYS wash/dry and press my fabrics before I make clothing.) However, some of my favorite dresses I've made like this have come from the remnant rack and there is only 18" so that is what I use.

Cuts
Just put the length and chest measurement #1 together. Now cut two pieces of fabric to this size.
Done.












Pictured are two dress pieces and thick strap pieces.


Straps
Depends on what type you would like.

Spaghetti Straps 
I used this tutorial.

Narrow Straps 
Size of Dress          Cut Two Pieces
NB - 12 months              2.5" x 11"
18 months - 24 months   3" x 13"

Thick Straps
Size of Dress                   Cut Two Pieces
NB - 12 months              4" x 11"
18 months - 24 months   4.5" x 13"

Ribbon or Ric Rac
Size of Dress                  Cut Four Lengths & Seal the Ends

NB - 12 months              10"
18 months - 24 months   12"

Note for spaghetti or ribbon/ric rac straps: I like to always make my straps longer, the measurements give room for that. Once I am done, I try the dress on my girl, tie straps in place then cut to the appropriate length. Then you can remove the dress and seal the ends once more.

Dress
Note: I use a serger on my dresses. However, I gave measurements for making a dress WITHOUT one. When folding your raw edges under, just repeat to cover your raw edges. You will see me only doing it once. To finish exposed raw edges, just zig zag stitch close to the raw edge.

1. Place dress pieces right sides together. Sew down the length sides, the 16" sides in my case. Press seams. (Zig zag side seams to finish.)















2. Turn under 1/4" from the top edge and press. Turn under 1/4" again and press.















3. Turn under 3/4" from the bottom edge and press. Turn under 3/4" again and press.














4. For thick or narrow straps turn under 1/4" on all sides and press. Repeat. (Do the ends first then the sides.) Top stitch around the entire strap about 1/8" from the edge.














5. Time to do a little shirring.

For more detailed directions check out this tutorial. 

Remove the regular thread from the bobbin and replace with the elastic thread bobbin. Change your machine settings for shirring. Line up the INSIDE edge of your presser foot with the top stitching of the strap. Hold down the tails of the threads and start sewing. Backstitch several times to secure the elastic thread. Continue shirring and backstitch when you get to the end. Repeat for other side and other strap. (For the narrow strap, I just did one row of shirring.)















6.  For thicker strap, do one more row of shirring. This time line up the INSIDE edge of your presser foot with the row of shirring you just did. Shirr as you did in step 5.














7.  Now shrink or snich up the straps by steaming with your iron or spraying it with water then ironing.  The top strap is before and the bottom is after.














 8. Pin the straps in place. You may need to measure where the straps will fall on your dress. I usually place mine about 3.5" - 4.5" in from the side seams. (Yes you still haven't top stitched around the top yet.)

9. Remove the elastic thread and replace with regular thread. CHANGE YOUR MACHINE SETTINGS BACK TO THE REGULAR SETTINGS. :)

10. Beginning from a side seam, top stitch the top edge of the dress about a 1/8" from the edge.  There is no front or back to this dress, but I like to mark one side as the back. I just cut a piece of ribbon, fold it in half and sew it under the top edge as I am top stitching. You will be top stitching and securing your straps in place at the same time.





























11. For the bottom edge, top stitch about 1/2' from the edge. This gives it a nice thick/wide hem. I love thick/wide hems.  At this point your dress should look something like this:














12. We are almost done. Remove your thread from the bobbin and replace with elastic thread. (Sorry to make you do it twice!) Set your machine settings for shirring.

13. This time you will do the same process you did for the straps. Except this time line up the OUTSIDE edge of your presser foot with the top edge of the dress. Start shirring at a side seam. Hold down your thread tails and back stitch at the beginning and end.  After the first row, just line up the OUTSIDE edge of your presser foot with the previous line of shirring. I do about 5 - 6 rows for my 9 - 12 month dresses. (You can also measure really quick on your girl how far you want the shirring to come down on this dress.)





















14. When you are done your dress will look something like this:
(before steaming with an iron)

15. After.

Done. So sweet!!! Let me know if you try it out!!!!

Wednesday, April 28, 2010

Tutorial: Baby Hair Clips

Thanks for voting everyone! 


These cute little clips are the perfect size for newborns and/or babies with very fine hair. I made a bunch and after explaining this to a lot of people, I've decided just to put the directions here. So here are the two type of bows I make.
Yes, if you haven't figured it out already, I have a thing for polka dots.
First you will need:
snap clips, 
I used 1 1/4" (30mm) baby snap clips, but you can use whatever you like.

Edit: You can find this size on Etsy from various sellers. I purchased mine from Trimweaver. There are two types of snap clips: rectangular, the type I prefer, and triangular. Trimweaver sells these type of snap clips in sets of 24, 48, and 96.

ribbon

rosette flowers, if you wish

glue, I use hot glue

lighter or Fray Check, to seal the ribbons


First you need to line your clip.

To line this size of clip, cut a 2 1/2" piece of ribbon and seal the edges how you like. Then unsnap the clip and put a dab of glue on one end of the ribbon. Slide this end of the ribbon under the clip as shown. Put another dab of glue at the end of the clip to secure the rest of the ribbon.


Flip the clip over and place another dab of glue in the three places shown in the picture below. You will have a bit of ribbon left over. Wrap that bit over to the back of the clip and secure with glue.


To make the pictured 'Hair Clips with Flowers':

Now you can add a rosette flower if you like. To get the rosette flower to stick, put a dab of glue in the desired place and place the flower on top. You have to 'squish' the flower down to get it to hold well.

To make the pictured 'Colorful Hair Clips':

You will need to add a 'ribbon loop bow'. To make a ribbon bow cut a 3" piece of ribbon and 1 1/4" piece of ribbon. Seal the ends.

To make the loop part, put a dab of glue in the middle of the 3" piece of ribbon. Fold both ends of the ribbon to the middle where the glue is.


Your loop should look like this:


Flip the loop so the wrong side is facing you. (The side where the two ends meet in the middle.) Place a dab of glue where the two ends meet. Put the 1 1/4" piece of ribbon on the glue and wrap around the middle of the loop. Secure on the back again with a dab of glue.

wrong side of ribbon loop

right side of ribbon loop

Secure loop to your lined hair clip with glue.

Now go make a a bunch!



Thanks for reading!

LeAnne :)

Monday, October 19, 2009

Favorite Tutorials: Ruffle & Flower Onesie

So my pile of white onesies were looking a little sad and need of some personality. (I also made an amazing sewing machine purchase...a ruffle foot.) After I learned how to use it, I was wanting to do a project involving ruffles.


I found this great tutorial on U-Create for a Ruffle Onesie. I don't have a serger, sigh, and didn't want raw edges for my ruffles. So I thought to use ribbon! So cute. I attached my ribbon following the tutorial directions except with my ruffling foot...so fun! You can ruffle your fabric/ribbon the regular way too. If you use ribbon I reccomend at least 1" wide, that is what I used. Anything less might make it not so fun...for you to sew. I also recommend heat sealing the ends of your ribbon with a lighter. Easier than turning the raw edges under and sewing.


Then the front was looking a little lonely and in need of personality too ... enter the fabric flower. I used Heather Bailey's fabric flower tutorial for inspiration, then did my own thing. (Her tutorial is great...so use it! Especially if you will be gathering the traditional way.) I want to make a fabric flower to wear with cardigans this fall. Just attach a broach pin on the back and you're in business. They are so easy you could make one for just about every outfit...not really...but you get the idea. :) Below is just what I did...no pictures...


I cut a 2" x 12" piece of fabric, folded it wrong sides together. I pressed the strip in half to make it easier to feed through my ruffler. (Again, you can just baste long stitches and pull to gather it up.) After ruffling I turned under the raw edges on the short ends and straight stitched them where the stitching wouldn't show. Then I made the fabric strip into a flower shape by turning it on itself. Then I sewed it into place just below my ruffling stitches. The leaves are two cuts of ribbon looped, and tacked to the back. I have a bunch of flower die cuts so I cut some different flower shapes out of felt and decided on the fun fushcia color. This helped cover up lots of my stitching lines. Then I sewed on a button, going through the felt and fabric flower, to secure everything in place. Then I tacked it onto the onesie. Easy peasy.

And so cute!

Wednesday, October 14, 2009

A Blanket for Baby

I finished a little soft flannel blankey for the baby today. I love how it turned out. I also whipped up some quick burp cloths.







Tutorial for the blanket anyone? I am in love with the flannel print. I found both prints at Joann's. Starting next week their flannel is $1.99/yd. So stock up if you make blankets/burp cloths for baby showers. Last year at Joann's Day After Thanksgiving it was $1.49/yd...they are advertising the $1.99 as the lowest price of the year, so I dunno if they will drop it lower for Black Friday.

I am hoping to have a pattern ready for my Countdown/Advent Calendars in the next month. I know Christmas is around the corner. I also got the craziest idea for a new animal tote. I drew it out last night and would love if it actually came together. That one may have to wait till next year.

Have a great day!

Wednesday, September 9, 2009

Tutorial: Lady Bug Taggie





Materials:
  • print pattern (right click, save as, should save in the correct size, print!)
  • felt for back of wings
  • felt for body
  • fabric for front of wings
  • various ribbons and trims
  • embroidery floss - I used black and red
  • thread to match wings
  • fiberfill
  • two small bells (will be sewn inside wings)
1.


2. Fold ribbon and trims in half. Pin raw edges of trims to the curves of both FABRIC wings, on the right side, making sure the looped ends face the inside of the wing. (See picture)



3. Place a FELT wing on top of the of the FABRIC wing, pin . The felt wing should be facing the side with the ribbons/trims. Your trims will be in the middle.



4. Sew around the wing using 1/2" seam allowance. Back stitch at beginning and end. Leave a spot for turning on the straight edge. Trim curves and points with pinking shears. Do not trim the opening, you will need to turn that to opening to sew shut.



5. Turn wing right side out. Press if needed to get shape right. Slip a bell inside the opening. Turn the raw edges from the opening in and pin and place. Top stitch around the entire wing, making sure to catch the opening. Repeat steps 3 - 5 for other wing.



6. Place both wings on top of ONE felt body. Pin in desired positions. Hand sew in place with embroidery floss using two x's near the top of both wings. You want the x's to be about 1/2" from the edge of the body. (See second picture below to illustrate.) This will leave you enough room to blanket stitch the two bodies together.







7. Connect the two wings together at the top where both wings meet by sewing a series of quick stitches. Use your embroidery floss. (See photo below.)



8. Place the second body on top of the first body. Pin the two bodies together, being careful not to catch the wings.



9. Blanket stitch the two bodies together using six strands of embroidery floss. Before you close up both pieces, lightly stuff the lady bug with polyester fiberfill. I am not an embroidery stitch pro at all. However, here is a great video of how to do the blanket stitch if you need help.




Have fun! Make a couple in different colors!

LinkWithin

Related Posts with Thumbnails